Regin
DMD-C Differential pressure transmitter with built-in controller and display
Differential pressure transmitter
Navigate on this page
Specifications
| Power Supply | 24VAC/DC (21...27 V AC 50/60Hz / 21...27 V DC), 5.0 VA |
|---|---|
| Dimensions, external (WxHxD) | 89x129x58 mm |
| Display | Yes |
| Display type | LED, three digits |
| Analogue output load impedance 0...10v | > 2 kΩ |
| Analogue output load impedance 4...20mA | < 500 Ω |
| Pressure, range sensor | 0…999 Pa |
| Accuracy, pressure sensor 1 | ±1 % full scale at 20 °C % |
| Measuring range pressure | 0...100 / 0...300 / 0...500 / 0...999 Pa |
| Damping (electronic) | 0...20 s |
| P-band | 0...300 % |
| I-time | 0…999 s |
| D-factor | 0...999 |
| Protection class | IP54 |
|---|---|
| Ambient humidity (non-condensing) | 0…90 % RH |
| Storage temperature | -40…50 °C |
| Mounting | Wall |
| Weight, incl. packaging | 0.39 kg |
| Media | Air and non-corrosive gases |
| Analogue outputs type (AO) | 0…10 V DC / 4…20 mA pressure Controller output signal 0...10 V DC |
| Cable gland | M16x1,5 |
| Terminal type | Screw Terminal |
| Terminal wire size | 1.5 mm² |
| Material, housing | Polycarbonate (PC) |
| Material sensor | Silicone rubber |
Software & documentation
Product sheet
Instructions
Other documentation
Accessories
ANS-20
2 m plastic tube and two pressure outlets (straight)